TR4
All the parts on this list have been manufactured to a high and accurate standard and are used in the assembling of our new reinforced chassis which have been proven and tested. If there are any parts which are not listed, or if you require a specific section etc, please contact Colin Matthews to discuss.
We will also restore and straighten all or part of your existing chassis to whatever specification you require. We have been successfully providing this service for some years. Further details of our new and restored chassis work along with optional finishes are available.
Please note all chassis are made from 16swg zintec mild steel.
There are no prices stated at present but this will be rectified in the near future. In the meantime, please contact us by email colin@ctmengineering.co.uk or by phone on 01489 782 054.
Part Number | Description | ||
CTM1104
|
Chassis all new | ||
CTM1103
|
Wishbone lower front R/H/F and L/H/R | ||
CTM1262 |
Fibre glass wheel arch liners | ||
CTM1103A
|
Wishbone lower front R/H/F and L/H/R (exch) | ||
CTM1155
|
Fulcrum pin lower front | ||
CTM1105
|
Bump stop front turret L/H | ||
CTM1105A
|
Bump stop front turret R/H | ||
CTM1106
|
Fulcrum pin repair end front | ||
CTM1107
|
Front spring support | ||
CTM1108A
|
Rear crosstube 1 1/2 ” diameter rear chassis | ||
CTM1108B
|
Rear crosstube 1 3/4 ” diameter rear chassis | ||
CTM1109
|
Rear body mount to bumper | ||
CTM1110
|
Rear lever arm mounting | ||
CTM1111
|
Rear leaf spring mounting bracket | ||
CTM1112
|
Outrigger saddles and tube 6″ long | ||
CTM1112A
|
Outrigger saddles and tube full length | ||
CTM1113
|
Rear leg inner reinforcement | ||
CTM1114
|
Rear leg complete | ||
CTM1115
|
Front crosstube 1 1/4 ” diameter rear of chassis | ||
CTM1116A
|
Turret support | ||
CTM1117
|
Front chassis to bumper irons including bolts | ||
CTM1118
|
Leaf spring mounting bracket and plate | ||
CTM1119
|
Seat belt mounting bracket | ||
CTM1120
|
Early steering rack mount chassis | ||
CTM1121
|
Late steering rack mount chassis | ||
CTM1122
|
Stainless steel bottom pipe and boss | ||
CTM1122A
|
Stainless steel bottom pipe | ||
CTM1123
|
New turret, complete | ||
CTM1124
|
Unleaded cylinder head (own unit) | ||
CTM1125
|
Alloy narrow belt pulley kit conversion | ||
CTM1127
|
Alternator mounting brackets | ||
CTM1128
|
Front chassis rail (tapered) | ||
CTM1129
|
Engine mounting, including fulcrum pin and brk R/H | ||
CTM1130
|
Engine mounting, including fulcrum pin and brk L/H | ||
CTM1132
|
Front outer chassis rail ext | ||
CTM1133
|
Crossmember front of chassis | ||
CTM1249
|
Steering column bracket to bulkhead (RHD) | ||
CTM1254
|
Crosstube front of chassis | ||
CTMA552
|
Alternator 36amp | ||
CTM1260
|
Petrol tank, stainless steel |
Contact
CTM ENGINEERING Ltd
Southampton
Telephone: 01489 782054
Mobile: 07388 729 129
Email: colin@ctmengineering.co.uk